MSA Cairns 1010 Mode D'emploi page 3

WARNING!
Firefighting is an extremely dangerous activity. This manual must be carefully followed by all persons who
have, or will have, the responsibility for using or maintaining this fire helmet. This helmet will perform as
designed only if used and maintained according to the instructions; otherwise, it could fail to perform as
designed, and persons who rely on it for their safety may sustain serious personal injury or death.
The warranties made by MSA with respect to the product are voided if the product is not used and main-
tained according to these instructions. Read and observe the WARNINGS and CAUTIONS.
If any information in this manual is unclear, or if you have any questions, contact MSA Customer Service at
1-800-MSA-FIRE or visit our website at www.MSAfire.com before using this helmet. We encourage our
customers to write or call for a demonstration of this equipment prior to use or for any additional information
relative to use or maintenance.
WARNING!
Bourke Lenses provide LIMITED eye protection. This product (P/N 10186311) complies with the impact

requirements and other applicable requirements of the current NFPA 1971 and ANSI/ISEA Z87 stan-
dards, as indicated on the packaging and markings; however, it will not protect against all possible eye
hazards.
A severe impact can break lens causing serious injury. USE ONLY as marked. NEVER use to protect

against severe hazards including but not limited to: explosives, fragmenting grinding wheels or abrasive
discs, molten metal, chemical splash, lasers, welding, brazing, torch cutting, sport activities, simulated
war or paintball games, or similar activities. Use appropriate protective equipment.
Objects can get around lens and contact eye. For maximum protection, securely position lenses to

provide even and close eye coverage.
Use only MSA provided hardware for mounting Bourke Lenses.

Mount Bourke Lenses only to MSA Cairns 1010/1044 or 880 fire helmets.

DO NOT wear over personal eyewear.

Pitted, scratched, or cracked eyewear reduces protection and vision.

Contact with certain chemicals, including those in some sunscreens and bug repellents, may cause

cracking.
All plastics can degrade over time. Inspect routinely and replace damaged lenses immediately. Replace

at least every two years, even if no damage is evident.
Only Bourke Lenses marked with NFPA and ANSI Z87 markings are tested and certified to these stan-

dards.
Failure to follow these warnings can result in serious personal injury or death.

1 Kit Contents
The Bourke Lenses kit contains (see Fig. 4):
• 1 Bourke Lenses
• 2 Machine screws
• 2 Fiber washers
Bourke Lenses Mounting Instructions - MSA Cairns® Fire Helmets
Tools needed
• 2 Flat washers
•
• 2 Nuts
•
• 2 Nut covers
•
P/N 10186297/01
• 3/16" drill bit
Adjustable wrench
• Center punch /
Philips screwdriver
Spring loaded center punch
Drill
• Scissors
Kit Contents
US
3