Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Cleaning the Drain Pump Filter
Warning!
• Make sure that the machine has finished the washing cycle and is empty.
Switch it off and unplug it before cleaning the drain pump filter.
• Be careful of hot water. Allow the water to cool down. Risk of scalding!
• Clean the filter periodically every 3 months to ensure the normal operation of
the appliance.
Open the lower cover cap
Open the filter by
turning to the counter
clockwise
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak.
• Some machines don't have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the programme selected there can be
hot water in the pump. Never remove the pump cover during a wash cycle, always wait
until the appliance has finished the cycle, and is empty. When replacing the cover,
ensure it is securely re-tightened.
1
Rotate 90°C and pull
out the emergency
drain hose, and take off
the hose cap
4
Remove extraneous matter
2
Emergency
drain hose
5
29
After water runs out, reset
the drain hose
Close the lower cover cap
3
6
V .1
Publicité
