Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Quick Start
Caution!
• Before washing, please make sure the washer dryer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To
remove any residual water and to neutralize potential odors, it's
recommended to clean your appliance before first use. For this reason,
start the Algodón/Algodão program at 90°C without laundry and
detergent.
Calibration
It's recommended to calibrate the washer dryer, so that provide the
best performance.
The appliance is able to detect the amount of laundry loaded. This
function is optimizing the product performance by minimizing energy
and water consumption, saving you money and time. For this reason it's
recommended to calibrate the appliance for best use.
1- Remove all accessories from the drum and close the door;
2- Insert the mains plug to the socket;
3- Switch on the washer dryer and press Temp. y Speed simultaneously
for 10 seconds until "t19" is displayed;
4- Press
to start the appliance and wait till "****" is displayed.
13
V .1
Publicité
