Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Installation
Installation area
Warning!
！
• Stability is important to prevent the product from
wandering! Make sure the machine is standing leveled
and stable.
• Make sure that the product does not stand onto the
power cord.
• Make sure to maintain the minimum distances
from the walls as shown in the picture
Before installing the machine, the location
characterized as follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 5°C
5.Keep far away from the heat sources such as coal or gas burning
appliances.
Unpacking the washer dryer
Warning!
！
Packaging material (e.g. Films, Styrofoam) can
•
be dangerous for children.
There is a risk of suffocation ! Keep all
•
packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washer dryer and remove the base packaging.Make sure the small
triangle foam (a) is removed with the bottom packaging together. If not, lay
the unit down on the side surface and remove it manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
10
w
w
W> 20mm
a
V .1
Publicité
