Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Remove transport bolts
Warning!
！
• You must remove the transport bolts from the backside before using
the product.
Loosen the 4 transport
bolts with a spanner.
Levelling the washer dryer
Warning!
！
• The lock nuts on all four feet must be screwed tightly against the
housing.
Connect the water supply hose
Warning!
！
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
Note!
• Connect manually, do not use tools. Check if the connections are tight.
Remove the bolts
including the rubber parts
and keep them for future
use.
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level
and steady.
Connect the water supply
hose to the water inlet valve
and a water tap with cold
water as indicated.
11
Close the holes using the
cover caps.
V .1
Publicité
