INSTALLATION
Drain Hose
Warning!
!
Do not kink or protract the drain hose.
Position drain hose properly ,otherwise damage might result of water
leakage.
There are two ways to place the end of drain hose:
1.Put it into the water trough.
Water
trough
Acoustic Sponge
Note!
• Please make sure to assemble the acoustic sponges, which can
effectively reduce the noise caused by the machine while working, in
order to provide you with a more peaceful and quiet living
environment.
2x
2x
1. Get the machine laid on the floor, using some soft material like foam or
clothes between the machine and floor for a protection;
2. Stick the 2x longer sponges to the longer bottom edges of machine, and
the 2x shorter sponges to the shorter bottom edges.
2.Connect it to the branch drain pipe
of the trough.
12
V .1