Olympia NC 530 Mode D'emploi page 16

Settings and functions
2.1. Set functions
Addition
Press "ADD" button to activate the addition mode. The ADD
display turns on.
When the ADD mode is activated, the NC 530 sums up all
individual counting results.
If more than 999 banknotes are to be counted, then with 1,000
banknotes the displayed number is reset to 0 and counting is
resumed.
Pressing shortly the "C" button clears the counting results.
Batch Count
You can also use one of the programmed batch stops.
Press the BAT button once to display the batch value 100
bottom right on the display. Repeatedly press BAT button to
access batch stops of 50, 20 and 10.
Press "+1" button to adjust the preset values individually and
set each count stop between 1 and 200.
The machine stops as soon as the set number of banknotes is
reached. When the banknotes are removed from the stacker,
the counting continues.
Pressing shortly the "C" button clears the counting results. By
holding it approx. 2 seconds or longer, it clears the results and
switches off the batch function.
All manuals and user guides at all-guides.com
[16]
Addition and batch function enabled
Addition function disabled Batch function
enabled
Addition function on Batch function off