Publicité
Liens rapides
OPERATOR'S MANUAL
IMPORTANT:
Read safety rules and instructions carefully before operating equipment.
MTD PRODUCTS LTD., P.O. BOX 1386, KITCHENER, ON CANADA
19" Electric
Lawn Mower
This symbol on the product's nameplate
means it is listed by
UNDERWRITERS LABORATORIES INC.
769-01445
(10/04)
Publicité
Manuels Connexes pour MTD 769-01445
Sommaire des Matières pour MTD 769-01445
- Page 1 OPERATOR’S MANUAL 19” Electric Lawn Mower IMPORTANT: Read safety rules and instructions carefully before operating equipment. This symbol on the product’s nameplate means it is listed by UNDERWRITERS LABORATORIES INC. MTD PRODUCTS LTD., P.O. BOX 1386, KITCHENER, ON CANADA 769-01445 (10/04)
- Page 2 Numéro de série Copy the model number here: XXXXXXXXXXX XXXXXXXXXX Copy the serial number here: MTD PRODUCTS LIMITED KITCHENER, ON N2G 4J1 1-800-668-1238 www.mtdcanada.com CALLING CUSTOMER SUPPORT If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance of this unit, please call the Customer Support Department.
- Page 3 SECTION 1: IMPORTANT SAFE OPERATION PRACTICES READ ALL INSTRUCTIONS! This symbol points out important safety instructions, which if not followed, could endanger the personal WARNING: safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to oper- ate this machine.
- Page 4 16. Home circuit – This mower should be operated on a 15 31. Only use parts and accessories made for this machine by AMP circuit. If you experience difficulty in starting with a the manufacturer. Failure to do so can result in personal standard 15 AMP fuse or circuit breaker, contact your injury.
- Page 5 10. Never tamper with safety devices. Check their proper Service operation regularly. When servicing use only identical replacement parts 11. After striking a foreign object, stop the motor and listed in this manual. “Use of parts which do not meet the disconnect the power cord.
- Page 6 SECTION 2: SLOPE GAUGE Use this page as a guide to determine slopes where you may not operate safely. Do not operate your lawn mower on such slopes.
- Page 7 SECTION 3: UNPACKING INSTRUCTIONS Roll or slide the unit out of carton. Check the carton Remove Unit From Carton thoroughly for loose parts. NOTE: Reference to the right or left hand side of the REMOVE MANUAL & LOOSE PARTS mower is observed from the operating position. •...
- Page 8 1. Slide front frame 2. Place frame into rear frame Hand Knob Insulator inside bag Rear Frame Upper Handle Lower Hook Handle Hook (Align marks here) Front Frame Figure 4 4. Slip plastic channel 3. Slip handle out of notch over frame •...
- Page 9 • Place the hooks of the grass catcher into the slots Grass Catcher Bag Rear Discharge Door in the handle bracket assembly on each side of the lower handle as shown in Figure 8. Release the rear discharge door. To remove the grass catcher, lift the rear discharge door on the mower.
- Page 10 Cord Restraint Height Adjustment Lever The cord restraint is located on the back of the upper A height adjustment lever at each wheel provides handle and when used properly, helps to protect the cutting height adjustment. Each adjuster has nine motor/blade control assembly and also the extension height positions.
- Page 11 To engage the motor and blade, first be certain to follow T = Obstacles the previous steps for connecting a suitable extension cord, then referring to Figure 10: • Stand behind the unit and depress the locking button. • While holding the locking button down, pull the blade/motor control lever and hold it against the upper handle.
- Page 12 SECTION 7: MAKING ADJUSTMENTS Cutting Height Adjustment Handle Height Adjustment • The upper handle may be adjusted to three different height positions. To adjust the handle to the desired position, align one of the three marks on the top of the lower handle insulators with the Cutting Height mark on the upper handle insulators.
- Page 13 • Reinstall the blade as described earlier in this section making certain to torque the cutting blade to Motor Shaft specifications. Cutting Blade 1. Insert screwdriver through hole Locking Plate 2. Balanced blade will be parallel to ground Blade Bolt Screwdriver Blade Figure 13...
- Page 14 SECTION 9: OFF-SEASON STORAGE The following steps should be taken to prepare the lawn • Store mower indoors, in a cool, dry place, out of mower for storage. reach of children. Do not cover lawn mower with a solid plastic sheet. Any plastic covering traps •...
- Page 15 SECTION 10: TROUBLE SHOOTING GUIDE Trouble Possible Cause(s) Corrective Action Handle not in position. Carriage bolts not seated in the handle Adjust the height of the handle and make sure that insulators. the carriage bolts are seated properly into the handle insulators.
- Page 16 SECTION 11: PARTS LIST/LISTE DES PIÈCES...
- Page 17 PART N° DE N° DE RÉF PIÈCE DE SCRIP TION DE SCRIP TION 782-0054B-0638 19" Deck Corps 19 po 731-2425 Motor Support Support du moteur 710-1756 Screw 724-0309 Electric Motor 115V, 1500W Moteur électrique 115V, 1500W 710-1756 Screw 731-2400 Air Guide Cover Couvercle-guide d’air 731-2383-0637 Hood...
- Page 18 SECTION 12: TWO YEAR LIMITED WARRANTY For TWO YEARS from the date of retail purchase within Canada, MTD PRODUCTS LIMITED will, at its option, repair or replace, for the original purchaser, free of charge, any part or parts found to be defective in material or workmanship.
- Page 19 SECTION 13: SAFETY AND DECORATIVE LABELS/ ÉTIQUETTES...