Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Others
Precautions
On safety
Should any solid object or liquid fall into the cabinet, unplug the amplifier
and have it checked by qualified personnel before operating it any further.
On power sources
Before operating the amplifier, check that the operating voltage is
identical with your local power supply. The operating voltage is indicated
on the nameplate on the back of the amplifier.
If you are not going to use the amplifier for a long time, be sure to
disconnect the amplifier from the wall outlet. To disconnect the AC power
cord (mains lead), grasp the plug itself; never pull the cord.
AC power cord (mains lead) must be changed only at a qualified service
shop.
On heat buildup
Although the amplifier heats up during operation, this is not a malfunction.
If you continuously use the amplifier at a large volume, the cabinet
temperature of the top, sides and bottom rises considerably*. To avoid
burning yourself, do not touch the cabinet.
* The top of the cabinet may become too hot to touch.
On placement
Place the amplifier in a location with adequate ventilation to prevent heat
buildup and prolong the life of the amplifier.
Do not place the amplifier near heat sources, or in a place subject to direct
sunlight, excessive dust, or mechanical shock.
Do not place anything on top of the cabinet that might block the
ventilation holes and cause malfunctions.
18
US
On cleaning
Clean the cabinet, panel, and controls with soft dry cloth. Do not use any
type of abrasive pad, scouring powder, or solvent, such as alcohol or
benzine.
If you have any questions or problems concerning your amplifier, please
consult your nearest Sony dealer.
Publicité
Chapitres
Table des Matières
Dépannage
