Connecting Audio Equipment - Sony TA-A1ES Mode D'emploi

Connecting audio equipment

You can connect equipment with analog audio jacks, such as a Super
Audio CD player or CD player, to the amplifier.
The amplifier does not support phono inputs.
Before connecting audio equipment, make sure that you disconnect
the AC power cord (mains lead).
Use an audio cable (not supplied) or an XLR (balanced) cable (not
supplied) to connect equipment to the analog audio output jacks.
Audio cable (not supplied)
Connect the white plug to the L jack and the red plug to the R jack.
XLR (balanced) cable (not supplied)
2: HOT (+)
1: GROUND
3: COLD (–)
12
US
Align.
Press here to disconnect.
Notes

Since the XLR (balanced) cable is locked, you cannot disconnect the cable
by pulling it.

If you carry the amplifier or audio equipment with the cable connected, it
might be damaged. Make sure that you disconnect the cables before
carrying it.
 Connect the cables firmly and securely. Otherwise, noise may be result.