Publicité
Les langues disponibles
Les langues disponibles
Characteristic Meaning
Jumper
Power supplied by the nurse call sys-
tem (24 V DC, max. 60 mA for controlling
a relay)
External power supply (24 V AC or DC,
max. 1A)
8. Control LED (red)
Table 3. Signaling of the control LED (red)
Signaling
Does not light up.
Flashing slowly (1 s ON - 1 s OFF).
Flashing quickly
(200 ms ON - 200 ms OFF).
Continuous light longer than 10 s.
9. Technical data
Supply voltage
Maximum current consumption 230 mA
Dimensions (HxWxD)
Housing material
Ingress protection code
Ambient temperature
Relative humidity
00 8804 70, 09/23 (Rev. 1.0)
Means
OSYnet SafetyController 2 (SE) without power
supply or defective.
Normal operation = IP-SystemManager or OSYnet-
SafetyController is controlling the group.
OSYnet-SafetyController 2 (SE) ready for opera-
tion.
OSYnet-SafetyController operation = OSYnet-Safe-
tyController 2 (SE) is controlling the group.
OSYnet-SafetyController 2 (SE) not ready for oper-
ation.
24 V DC
90 x 106 x 58 mm
Polycarbonate
IP20
+5 °C – +40 °C
0 % – 85 % (non-condensing)
Setting
Jumper OUT 3/4 inserted.
Jumper OUT 3/4 not inser-
ted.
15
Publicité
