Publicité
All manuals and user guides at all-guides.com
MS-7053 ATX Mainboard
SATA Device Configuration
SATA Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
SATA Mode, On-Chip Serial ATA
These 2 items allow you to select the SATA and the ATA/IDE configuration.
For the setting options of SATA Mode, select [IDE] if you want to have SATA as IDE
function. Select [AHCI] to allow the SATA to have Advanced Host Controller Interface
(AHCI) feature, which supports improved serial ATA disk performance with native
command queuing & native hot plug. Select [RAID] to use SATA as RAID function.
Setting options: [IDE], [AHCI], [RAID].
For the setting options of On-Chip Serial ATA, select [Disabled] if you want to
disable both SATA controller. Select [Combined Mode] or [Enhanced Mode] to use the
IDE, S-ATA and P-ATA devices. Select [Auto] to let the system arrange automatically.
Select [SATA Only] to let the SATA operate in legacy mode. Refer to the following
tables for details.
SATA Only
PATA Pri, SATA Sec
SATA Pri, PATA Sec
PATA Only
IDE
AHCI
RAID
PATA IDE Mode
This item allows you to select the parallel ATA channel. Setting options:[Primary],
[Secondary].
SATA Port
This feature allows users to view the SATA port as primary or secondary channel.
E-3-8
On-Chip Serial ATA
(Combined)
[SATA 1/3/2/4]
[IDE1, SATA2/4]
[SATA1/3, IDE1]
[IDE1]
On-Chip Serial ATA
(Enhanced)
[IDE1, SATA 1/2/3/4]
[IDE1, SATA 1/2/3/4]
[IDE1, SATA 1/2/3/4],
[SATA support RAID 0 or 1]
Publicité
