Publicité
Les langues disponibles
Les langues disponibles
3. F
ilter
•
This product is fitted with a filter to protect the heating element from dust and dirt.
•
The filter is removable to be easily cleaned with water (picture 5).
•
To keep the heater in perfect condition, clean the filter once every six months REMEMBERING TO PUT IT BACK
AGAIN AFTERWARDS.
•
Every 120 working hours, the user is notified of the need to clean the filter on the back of the product. The warning
is given in the form of a running message on the display that reads:
•
Even when the display is showing the message indicated above, the product continues to work in the mode active
at the time the notification appears.
•
If any key is pushed the text is removed from the display. It will once again be displayed when the fan heater has
been running for another hour.
•
By holding the
key down when the notification is displayed, the built-in counter is reset and the notification
will be displayed again after another 120 working hours. Confirmation of resetting is given by a message on the
display for 5 seconds that reads "donE " .
4. t
oWels
•
The product is equipped with a towel rail and n. 2 additional hooks placed on rail's back side.
•
Please do not push or embed towel close to the air outlet grid (picture 6) but place them as shown in picture 7.
5. c
oMManD DescriPtion anD Functioning
•
The heater is fitted with a double pole electromechanical ON/OFF switch on its left side. Switching off the product
the supply voltage is disconnected from all the internal components.
•
The following controls are available on the front panel (picture 8):
A -
Display
B -
Show and increase
C -
Show and decrease
D -
Settings
E -
Frost free mode
F -
Programmed mode
G -
Stand-by
H -
Frost free mode led indicator
I -
Programmed mode led indicator
J -
Functioning led indicator
The product can be operated in 3 different modes: automatic, programmed or frost free.
Automatic Mode
In this mode the product works to reach and maintain the Comfort temperature set by the user. An automatic power
management system allows optimum control of consumption and precise adjustment of the comfort level automatically
maintaining the selected temperature constant over time, in accordance with what has been set on the electronic
thermostat.
In automatic mode is also available a special feature, which is activated at user's choice, which allows to detect the
possible opening of a window and force the functioning to the Frost free mode to minimize energy waste.
Programmed Mode
The product can be programmed, on hour base, for each day of the week. For each hour of the day it is possible to
define the reference temperature to be reached/maintained, choosing between Comfort, Eco (whose value is equal to
the Comfort temperature reduced by 3,5°C) or Frost free.
In programmed mode the open window detection function is disabled so that the product can correctly follow
the temperature profile defined by the user.
Frost free Mode
In this mode the thermostat is automatically set to maintain 7 ° ± 3 ° C.
" PULIrE FILtro - CLEAn FILtEr - nEttoYEr FILtrE " .
18
Publicité
