PRO-POINT 8340507 Manuel D'utilisateur page 8

V 3.03
2. Installation and removal of the socket
a. The tool must be turned off and unplugged before
any assembly.
b. Press the socket onto the drive shaft.
c. To remove the socket, pull out and pull off.
OPERATION
1. Tightening torque is different according to the type and size of
bolt being used, as well as the materials being tightened. If you are
unsure of the torque required, use a torque wrench to measure the
force exerted.
2. Firmly grip the tool and place the socket on the bolt or nut. Turn on
the machine by squeezing the trigger to start tightening
(see Figure 1).
8
All manuals and user guides at all-guides.com
1/2 IN. DR ELECTRIC IMPACT WRENCH
For technical questions call 1-800-665-8685
8340507
Fig.1