Publicité
Les langues disponibles
Les langues disponibles
8340507
IMPORTANT!
Keep this manual for the safety warnings, precautions and
operating, inspection and maintenance instructions. When this manual
refers to a part number, it refers to the included parts list.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean
and well lit.
2. Keep anyone not wearing the appropriate safety equipment away
from the work area.
IMPORTANT! Minimize distractions in the work environment
Distractions can cause you to lose control of the tool.
3. Always lock up tools and keep them out of the reach of children.
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute
(ANSI) when using this tool.
1.
Dress properly, wear protective equipment. Use breathing, ear, eye,
face, foot, hand, and head protection. Always wear ANSI approved
impact safety goggles, which must provide both frontal and side
protection. Protect your hands with suitable gloves. Wear a full
face shield if your work creates metal filings or wood chips. Protect
your head from falling objects by wearing a hard hat. Wear an ANSI
approved dust mask or respirator when working around metal,
wood and chemical dusts and mists. Wear ANSI approved earplugs.
Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working. Wear steel-toed boots
to prevent injury from falling objects.
2. Control the tool, personal movement and the work environment to
avoid personal injury or damage to the tool. Stay alert, watch what
you are doing and use your common sense.
3. Keep articles of clothing, jewellery, hair, etc., away from moving
parts to avoid entanglement with the tool.
4. Do not operate any machine / tool when tired or under the
influence of drugs, alcohol or medications.
5. Do not overreach when operating a tool. Proper footing and
balance enables better control of a tool in unexpected situations.
6. Use clamps or other practical ways to support or secure the work
piece to a stable platform. Holding the work piece by hand or
against your body is not stable and may lead to loss of control
and injury.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
1/2 IN. DR ELECTRIC IMPACT WRENCH
V 3.03
3
Publicité
