Eneo DLR5-08 Guide D'installation Rapide page 50

Previous/Next Selecting
Group
Alarm Selecting
er during an alarm.
Panic Selecting
again stops panic recording.
Camera Menu Selecting
Zoom: Selecting Zoom and choosing the camera number zooms
the current playback image of the selected camera on the
screen.
Audio: Selecting Audio toggles audio playback On and Off.
Show/Hide Text-In: Selecting Show Text-In or Hide Text-In shows
or hides the text-in data on the screen if the video was recorded
with text-in data.
Edit Group: Selecting Edit Group enters to the Active Cameo
mode.
Export Selecting
•
•
•
Status Selecting
tem, inputs and storage.
Data Source Selecting
Exit Selecting
mode.
50
All manuals and user guides at all-guides.com
or moves to the previous or next page.
resets the DVR's outputs including the internal buzz-
starts panic recording of all cameras, and selecting
displays the Camera Menu.
displays the Export menu.
A–B Clip-Copy: Selecting A–B Clip-Copy will set the starting
point of the video to be clip copied, and the icon displays at
the bottom-left corner of the screen. Selecting A–B Clip-Copy
again will set the ending point of the video to be clip copied
and displays the Clip-Copy screen.
Clip-Copy: Select Clip-Copy, and the Clip-Copy screen ap-
pears to allow clip copy setup.
Print: Selecting Print allows you to print a selected image.
will allow you to check the status of the DVR's sys-
allows you to select the data source to be searched.
exits the search mode and enters the live monitoring