Eneo DLR5-08 Guide D'installation Rapide page 47

Login/Logout Selecting
to select a User and enter the password to log into the system.
Selecting
whether or not you want to log out the current user.
Monitor Selecting
and Spot Monitor.
Display Selecting
• Full Screen: Selecting
button displays the selected camera full screen.
• PIP, 2x2, 1+5, 1+7, 3x3, 4x4: Selecting
displays the cameras in the selected multiview screen mode.
• Camera/Status OSD: Selecting Camera OSD or Status OSD
toggles Camera OSD or Status OSD On and Off.
Previous/Next Selecting
Group
Freeze Selecting
select
Alarm Selecting
during an alarm.
Panic Selecting
again stops panic recording.
All manuals and user guides at all-guides.com
accesses the Login screen, and you will be asked
displays the Logout screen asking you to confirm
will allow you to select the monitor from Main Monitor
displays the Display Menu.
or moves to the previous or next page.
will freeze the current image on the screen until you
again.
resets the DVR's outputs including the internal buzzer
starts panic recording of all cameras, and selecting
① Login/Logout
② Monitor
③ Display
④ Previous Group
⑤ Next Group
⑥ Freeze
⑦ Alarm
⑧ Panic
⑨ Sequence
⑩ Camera Menu
⑪ Search
⑫ Setup
⑬ Status
and choosing the camera number
, ,
DE
EN
FR
PL
RU
, , or
47