Midland ALAN 78 PLUS MULTI Mode D'emploi page 9

Les langues disponibles

6. "AM/FM"(LCR) button: To select AM or FM mode. If you switch on the unit and push

"AM/FM"(LCR) and "SCAN" at the same time, you will select the operating band,

which will be visualised on the displayed.

If you select a frequency band operating in FM mode only, this button enables the LCR

function (Last Channel Recall).

7. "SCAN" button: With this control, you can automatically seek for a busy channel.

Turn the Squelch clockwise until the background noise is no longer heard.

Press the "SCAN" button: the transceiver will scan automatically all the channels until

a carrier is being received. If you switch on the unit and push "SCAN" and

"AM/FM"(LCR) at the same time, you will select the operating band, which will be

visualised on the displayed.

8. "Squelch" Control: For the maximum receiver sensitivity, the control must be regula-

ted exactly where the receiver background noise disappears.

9. "ON/OFF Volume" Control. In "OFF" position your transceiver is OFF. Turn this control

clockwise to switch on the unit. Turn the knob clockwise a little more to set the audio

level, until you get a comfortable reception.

10. Microphone jack: Insert the mic connector into this jack.

REAR PANEL

EXT

S. METER

13,8V

11. "EXT" jack: external loudspeaker jack.(the internal loudspeaker is excluded)

12. Power 13.8V DC: power supply cable

13. S.Meter jack: it allows an external "S. Meter" connection

14. Antenna connector (SO239 connector type)

All manuals and user guides at all-guides.com

ANTENNA