Kenmore 116.23156C Guide D'utilisation Et D'entretien page 15

WARNING
Always unplug power cord from
electrical outlet before performing any
service on vacuum cleaner.
Under normal usage, the HEPA filter will
require replacement once every year.
However, vacuuming large amounts of
extremely fine dust or similar material over
a long period of time may decrease airflow
performance through the filter. If this
occurs, it may become necessary to
replace the HEPA filter more often.
To assure the best results, it is
recommended to change the filter at least
once a year.
1. Open the
Filter
filter cover by
Cover
pressing the
release latch
at the bottom
of the filter
cover and
lifting out and
up.
All manuals and user guides at all-guides.com
REPLACING EXHAUST FILTER
Release Latch
2. Remove
the HEPA
filter.
15
3. Install a
new HEPA
filter, by
inserting tabs
on the bottom
of the filter
into the slots
in the canister
and pressing
into place.
NOTE: Be sure the HEPA filter is facing
the right direction with the seal facing
the canister.
4. Reinstall filter cover by inserting tabs
on the top of the filter cover into the
slots on the canister. Press into place
and be sure release latch snaps into place.
Tabs
Slots
Slot
Tabs