Publicité
Les langues disponibles
Les langues disponibles
HOSE STAND
The vacuum cleaner with the floor nozzle,
wand, and hose can be stored while still
connected.
NOTE: The wand must be in the shortest
position
WARNING
Personal Injury and Product Damage
Hazard
DO NOT carry the vacuum cleaner while
it is in the storage position. Injury or
damage may result if the hose or
extension pipe becomes unattached.
1. Stand the
vacuum cleaner
up and insert
the wand
holder into the
wand holder
hole.
Hold
Wind
All manuals and user guides at all-guides.com
PERFORMANCE FEATURES
Wand
Holder
Wand
Holder
Hole
2. Hold the hose
and wind it
around the
wand.
11
THERMAL PROTECTOR
This vacuum cleaner has a thermal
protector which automatically trips to
protect the vacuum cleaner from
overheating. If a clog prevents the normal
flow of air to the motor, the thermal
protector turns the motor off
automatically. This allows the motor to
cool in order to prevent possible
damage to the vacuum cleaner.
To correct problem: Turn off and unplug
vacuum cleaner to allow the vacuum
cleaner to cool and the thermal
protector to reset. Check for and
remove clogs, if necessary. See
REMOVING CLOGS (page 12). Also
check and replace any clogged filters.
Wait approximately thirty (30) minutes
and plug the vacuum cleaner in and turn
back on to check if the thermal protector
has reset.
Publicité
