Publicité
Les langues disponibles
Les langues disponibles
WARNING
Turn off and unplug vacuum cleaner
before performing maintenance to the
vacuum cleaner.
1. Remove the dust
bin.
2. Slide the lever in
the direction of the
arrow to remove
the embedded dust.
3. Push the release button, open the dust
bin, and then open the filter.
Release
Button
4. Take out the cleaning brush (included) to
clean the dust filter and pre-filter.
Brush
5. Push the dust filter cover release latch to
pull out dust filter cover.
Dust Filter
Cover Release
Locating
Mark
All manuals and user guides at all-guides.com
CLEANING DUST BIN
Lever
Dust
Filter
Filter
Latch
Dust Filter
Cover
6. Wash all
parts of the
dust bin.
7. Allow filter to dry 24 hours before
putting back into vacuum cleaner.
NOTE: When the cleaning of the filter no
longer restores vacuum cleaner suction to
full power, replace the filter.
DO NOT operate without filter installed.
DO NOT wash in the dishwasher.
DO NOT install damp.
CAUTION
• Do not attempt to dry with a hair
dryer or by placing in clothes dryer.
Hot air may cause the filters to warp.
• It is not necessary to wash after each
use.
Inside of
locating
strip
Dust Filte
Cover
9. Close the dust
bin and reattach
it as shown.
14
8. Install the dust
filter cover along
inside of locating
strip, and make
sure you hear a
"click."
Publicité
