Avaya 10U100 Mode D'emploi page 21

60653-01 10U100 UserGuide_r2
All manuals and user guides at all-guides.com
trouble
6
s h o o t i n g
P R O B L E M I T E M S T O C H E C K
• Make sure that the Ringer
The remote
does not ring
• Ensure that the Telephone Cord
Adapter
• Recharge the Remote Battery
the Remote Charging Well
• Disconnect the AC Adapter from the power source and
reconnect it in a known good outlet.
• Use the Remote
• Make sure your Remote Rechargeable Battery
I cannot hear
a dial tone
securely seated in the Charging Well
charged. The Battery may need to be charged for
8 hours prior to first use.
• Check that all cords are correctly connected and firmly
in place.
• Adjust the Dual Function Receive Volume Control
up to increase the volume.
• Make sure the Remote is within range of the Base.
• Separate and then reconnect the Rechargeable Battery
and Remote
• Return the Remote to the Charging Well
to re-establish a communication link.
5/11/01 12:12 AM Page 20
is "On".
and the AC
are installed correctly.
by firmly placing it in
.
in an area closer to the Base
and/or fully
.
20
E N G L I S H
.
is
Key
for 5 seconds