Hansgrohe Axor Carlton 17010 1 Serie Instructions De Montage / Mode D'emploi / Garantie page 6

4
1
2
6
English
Secure the supply lines to the stops.
Install the drain.
Set the high temperature limit stop (if desired).
9 mm
16 mm
Set the high temperature
limit stop (optional)
Use a 4 mm Allen wrench to push the screw
cover into the handle. (Retrieve the screw
cover when the handle is removed.)
Loosen the handle screw 4 complete turns.
Remove the handle.
4 mm
Remove the flange.
Remove the handle screw from the stem of the
cartridge.
Remove the high temperature limit stop.
Use two wrenches to insure
that supply hoses do not
twist.