Display Items; Repeat And Shuffle Play; Radio; Storing And Receiving Stations - Sony CDX-GT320 Mode D'emploi

CD
For details on selecting a CD/MD changer, see
page 10 (CDX-GT320/GT32W only).

Display items

Example: CDX-GT320
A Source (CDX-GT320/GT32W only)
B Track number/Elapsed playing time, Disc/
artist name, Album number*
Track name, Text information*
*1 Album number is displayed only when the album is
changed.
(CDX-GT320/GT32W/GT220/GT22W only)
*2 When playing an MP3, ID3 tag is displayed, and
when playing a WMA, WMA tag is displayed.
(CDX-GT320/GT32W/GT220/GT22W only)
To change display items B, press (DSPL).
Tip
Displayed items may differ depending on model, disc
type, recording format and settings. For details on
MP3/WMA, see page 13.
(CDX-GT320/GT32W/GT220/GT22W only)

Repeat and shuffle play

1
During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
Select
TRACK
ALBUM*
SHUF ALBUM*
SHUF DISC
* When an MP3/WMA is played.
(CDX-GT320/GT32W/GT220/GT22W only)
To return to normal play mode, select "
or "SHUF OFF."
8
1 , Album name,
2 , Clock
To play
track repeatedly.
album repeatedly.
album in random order.
disc in random order.
OFF"

Radio

Storing and receiving stations

Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1
Press (SOURCE) repeatedly until
"TUNER" appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, AM1 or AM2.
2
Press and hold (BTM) until "BTM"
flashes.
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.

Storing manually

1
While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
"MEM" or "MEMORY" appears.
Note
If you try to store another station on the same number
button, the previously stored station will be replaced.

Receiving the stored stations

1
Select the band, then press a number
button ((1) to (6)).

Tuning automatically

1
Select the band, then press (SEEK) –/+
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold (SEEK) –/+ to locate the
approximate frequency, then press (SEEK) –/+
repeatedly to fine adjust to the desired frequency
(manual tuning).