Venga VG RVC 3001 BK Mode D'emploi page 15

Cleaning robot 's rolling brush,side brush, swivel wheel and sensors.
1. Take out the rolling brush, clean the
vacuuming channel with a cloth.
2. Clean the rolling brush: if any hair or
threads or yarn got stuck, simply cut
them with the help of the cleaning
tool knife that has been provided
with your Venga! robot. Then remove
everything carefully. Only if the
central brush can rotate freely, your
Venga! robot can work to your
satisfaction.
3. Remove the side brush, use a cloth
to remove the dust from the brush.
4. Pull out the swivel wheel, then clean
the swivel wheel with the cleaning
tool.
5. Dust off the cliff sensors to maintain
the best performance.
VG RVC 3001 14