brennenstuhl ML CA 110 IP54 Mode D'emploi page 5

Mobile Battery-Operated LED Chip Light
D
ML CA 110 IP54
SAFETY INFORMATION
• Read the operating instructions carefully before using the light and store them for future use.
• Check the light and the power adapter for damage prior to each use. Do not use the light
or the power adapter if they are damaged. In that case, contact a qualified electrician or the
manufacturer's service department at the address provided. Non-compliance can result in
danger to life from electric shock!
• Do not open the device. The light does not contain any components that need servicing. The
LEDs are not replaceable.
• Do not use the work light in potentially explosive environments where flammable liquids,
gases or dusts are present. Danger to life!
• Keep children away from the work light. Children are unaware of the risks posed by electrical
current.
• Always use the power adapter provided with the light to charge the batteries. The use of other
power adapters may result in damage to the batteries or in an explosion!
• Disconnect the power adapter from the mains and switch off the light before cleaning it. Clean
the light regularly with a dry, lint-free rag. A slightly damp rag may be used to remove more
stubborn dirt. Do not use solvents, corrosive cleaners or the like.
• Do not look directly at the light to avoid being blinded.
SWITCHING THE LIGHT ON/OFF:
To switch the light on set the switch to the "I" (ON) position. To switch it off, set the switch to the
middle position, "O" (OFF).
BA_ML_CA_110_IP54_140220.indd 5
³
5
20.02.14 14:25