Publicité
Les langues disponibles
Les langues disponibles
Place the container upside down, on a suitable work surface.
3
Proceed with the cleaning/preventive maintenance of the container and the agitator. Once completed, reverse the steps to reassemble
5
the machine.
Disassembly and dismantling
+
Before proceeding with disassembly, all possible power and/or power sources must be disconnected.
Waste must be disposed of according to the corresponding national regulations.
+
For disassembly and dismantling operations, use the following personal protective equipment: gloves and
protective glasses.
+
Covers, flexible ducts and components made of plastic material (or any non-metallic material) must be
disassembled and disposed of separately.
+
Hydraulic and electrical components (such as valves, solenoid valves, etc.) must be disassembled for reuse if
they are in good condition or, if possible, checked and recycled.
+
Take the components to an authorized recycling centre so that they are recycled and/or disposed of in an
environmentally safe way. Recycle unwanted materials instead of disposing of them.
Waste disposal
Waste must be disposed of according to the corresponding national regulations.
Remove the two M6 domed screws that hold the agitator
4
retaining disc to the motor shaft, using a Nº 4 Allen key.
www.masterproducts.es
37
Publicité
