Publicité
Les langues disponibles
Les langues disponibles
Start-Up
Assembling the MT Gentle 50/75
The MT Gentle 50 and 75 machines are delivered fully protected
1
and boxed. Open the box and check the contents. Place the parts
on a flat surface with room to manoeuvre.
Place the body of the machine (A) as shown in the image, on a flat surface with a height to facilitate assembly. Fix a foot with four screws (H)
3
with the help of Allen key Nº 4. Proceed in the same way with the other three remaining feet.
IMPORTANT: Mount the two rubber stops (F) on the front corners of the machine, highlighted in red.
Position the machine supported on its four legs. IMPORTANT:
4
The MT Gentle 75 model must be handled by two people
due to its weight.
Install the two levelling feet (E) together with the two nuts DIN 934
2
M10 (O) on the base of the two feet (B). Mount the two fixed feet
(F) on the two remaining feet (B).
Identify the collection bag (J) and the ring (K) that is supplied closed
5
with the bag connector (L) already assembled. Separate one end
of the ring from one end of the connector and insert the free end
through the slit of the bag (J) until it makes a complete turn as
shown in the following image.
www.masterproducts.es
L
K
25
Publicité
