Télécharger Imprimer la page

Aiwa CDC-X10 YU Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

m SOUND ADJUSTMENTS
(—)
1 Press MODE to select the mode You want to adjust
'7
from VOL (volume), BAS (bass), TRE (Treble), BAL
(balance), and FAD (fader).
I
Themodeindicatorlightsupinthefollowingorder.
(
u
J
The selected mode changes to the volume mode when MODE
is pressed for more than 5 seconds.
2 Press
A
or V (for less than 0,5 seconds) to adjust
the sound quality.
To change the level rapidly, press and hold A or 7 down
longer.
A side
V side
Ifrft
Increases the
Decreases the
v uf_
volume level.
volume level.
%H5
Increases the bass
Decreases the bass
level.
level.
Increases the treble
Decreases the treble
~l?~
I level.
level.
WI
Decreases the level
Decreases the level
L
of the left
of the right
speaker(s).
speaker(s).
Decreases the level
Decreases the level
~~~
of the front
of the rear speakers.
speakers.
Note
*Without
selecting any mode with MODE, only the volume level can be adjusted by pressing
A
or T.
LOUD (loudness) function
Press LOUD to reinforce bass and treble especially when listening at low volume level. To cancel the
loudness, press LOUD again.
To set the turn-on volume level
The unit can be set to always turn on at the same volume level.
After adjusting the volume with
A
or Y, press and hold POWER down for more than 2 seconds until a
beep tone is heard.

Publicité

loading