Aiwa CDC-X10 YU Mode D'emploi page 12

12
~ CD PLAYBACK
Press any button (except ~) to turn on the unit
1
Insert a disc with the labeled side uo to start
playback.
If adiscis already inserted, press R/CD toselectthe CD
operation.
DISC indicator lights up, and the track number and elapsed
playing time are displayed.
If a 3-inch (8 cm) CD is inserted, both CD and CD-S indicators
light up.
z Adjust the volume with A or V.
Press these buttons to operate CD playback.
Press
To
A
Load or eject a disc.
EIl
Pause play.
The track number and elapsed playing time flash on and off.
To resume play, press ~11 again.
E
Forward on the disc. Press and hold * down until the stari of the desired
passage, then release it.
4 Reverse on the disc. Press and hold + down until the start of the desired
passage, then release it.
w
I Skip to the next track with a short press (for less than 0.5 seconds).
Each extra press skips forward one extra track.
To skip forward rapidly, press and hold WI down until the desired track number is
disulaved, then release it.
w
Restart the track currently in play with a short press (for less than 0.5 seconds).
Each extra press skips backward one extra track.
To skip backward rapidly, press and hold K down until the desired track number
is displayed, then release it.