Aiwa CDC-X10 YU Mode D'emploi page 10

~ PRESETTING STATIONS
Up to 6 stations for each band [FM1, FM2, FM3, and AM] can be stored on the preset station buttons.
1 Press BAND to select the desired band from FM1,
FM2, FM3, and AM.
z Tune in the station to be preset.
a Press one of the preset station buttons (1 - 6) for
more than 2 seconds until a beep tone is heard.
The number of the pressed preset station button is displayed.
m
[
w
J
4 Repeat steps 2 and 3 to preset other stations.
Note
As FM1, FM2, and FM3 have the same frequency range, up to 18 stations can be preset for FM.
. When a station is preset on the preset station button on which another station of the same band has
already been preset, the previously preset station is automatically erased.
10[