Aiwa CDC-X10 YU Mode D'emploi page 11

Automatic Presetting
The automatic presetting function is used to automatically preset up to 6 stations for each band.
1
Press BAND to select the desired band.
2 Press and hold A.M down for more than 2 seconds until a beep tone is heard.
The scanning starts from the currently displayed frequency to higher frequencies and stops when 6
stations have been preset or the receivable frequencies have been scanned once.
Note
The presetting is not performed if there is no station to be tuned in.
When the automatic presetting is performed, the previously preset stations are automatically erased.
=To stop the automatic presetting, press A.M again or press any of the preset station buttons (1 – 6).
To scan the preset stations
Press A.M for less than 1 second.
Each preset station is tuned in for 5 seconds in order.
To stop the scanning, press A.M again or any of the preset station buttons (1 – 6).
To tune in the preset stations
Press BAND to select the desired band and press the desired preset station button (1 – 6).
The number of the preset station button is displayed and the preset station is received.
Ill