Publicité
Les langues disponibles
Les langues disponibles
EN
15 Troubleshooting
FAULT
Mobile air
conditioner does
not start.
The mobile air
conditioner is
not operating
with the
expected
effectiveness.
Insufficient
cooling.
Air is not blown
out.
Operating
noises.
Seite | 32
POSSIBLE CAUSES
Mains plug is not plugged
into the plug socket.
The "W.F" display lights up
(water tank full).
The room temperature is
lower than the set
temperature.
Doors and/or windows are
not properly closed.
There are additional heat
sources in the room.
The temperature is set too
high.
Air inlet or outlet is
blocked.
Air filter or air outlet is
blocked.
The mobile air conditioner is
not standing on a level and
stable surface.
Air filter or air outlet
blocked.
Appliance makes "flowing"
noises.
MEASURES
Check whether the mains plug
has been plugged in correctly.
Empty the water tank.
Lower the set temperature.
Close all doors and windows,
etc. through which warm air may
enter.
Remove the heat sources, if
possible.
Lower the set temperature.
Remove objects from the air
inlet/outlet.
Clean the air filter and air outlet.
Observe the minimum
clearances.
See above.
Ensure that the mobile air
conditioner is standing on a level
and stable surface.
See above.
Flowing noise of the refrigerant.
No measures necessary.
Publicité
