Publicité
Les langues disponibles
Les langues disponibles
APPLIANCE DAMAGE!
•
Do not drop the remote control.
•
Keep away from direct sunlight.
•
Do not leave in the vicinity of
heat sources.
Replacing the batteries
1. Remove the protective cover on
the back of the remote control.
2. Replace the empty batteries with
two new ones.
RISK OF
ENVIRONMENTAL
DAMAGE!
As the batteries are harmful to the
environment, dispose of them in
accordance with the applicable
statutory regulations.
13.1 Timer function
The mobile air conditioner has a
timer function that lets you preset
the desired operating time (hours)
and a delayed starting time (in
hours). At the end of the set time,
the mobile air conditioner switches
on or off automatically.
Activating / deactivating
the timer
Set the operating time
1. With the mobile air conditioner in
operation, press button "C".
2. Set the desired operating time
between 0.5 and 24 hours with
buttons "F".
3. The set time appears on the
display.
Set the starting time
1. With the mobile air conditioner in
stand-by mode, press button "C".
2. Repeat the steps described
under: "Set the operating time"
As soon as the set time has
elapsed, the mobile air
conditioner switches on or off
automatically.
NOTE
Select the time between 0 and 10
hours in 0.5-hour steps, between 10
and 24 hours in 1-hour steps.
13.2 Water drain hose
Note that the water drain hose
connected to the mobile air
conditioner must not run higher than
the position of the hose connection
on the mobile air conditioner at any
point. Otherwise, condensation may
flow back into the mobile air
conditioner and damage the
appliance.
Disconnect the mobile air
conditioner from the mains power
supply before installing the water
drain hose.
EN
Seite | 29
Publicité
