OPERATING INSTRUCTIONS
This KOBE hood is equipped with four electronic controls with a 10-second standby startup &
30-second delay shutoff, two powerful centrifugal turbine impellers with charcoal filter set, and
two bright 12-volt 20-watt halogen lights.
The four button controls are Light Control, Speed Control A (cycles through Low, Medium,
High, QuietMode), Speed Control B (cycles through Low, QuietMode, High, Medium) and
the Power Control (On/Off). Refer to Figure 12.
Light Control
Speed Control A
(Cycles through Low, Medium, High, QuietMode
Turn On:
-
Press Power Control (On/Off) button once. (If any Control button is not pressed within
10 seconds, power will be automatically turned off).
-
The KOBE hood will start on Low speed. Each press of the Speed Control button will
cycle through the various speeds.
-
Press Speed Control A button to cycle from Low, Medium, High, or QuietMode. Press
Speed Control B button to cycle from Low, QuietMode, High or Medium.
-
Press Light Control button to turn halogen light on.
Turn Off:
-
Press Power Control (On/Off) button once, panel lights will flash and power will be
completely shut off after 30 seconds.
OR
-
Press Power Control (On/Off) button twice, all power will be shut off immediately.
-
If only the lights are on, pressing Power Control (On/Off) button once will turn power off
after 30 seconds.
All manuals and user guides at all-guides.com
)
(Cycles through Low, QuietMode
12
Figure 12
Power Control
Speed Control B
, High, Medium)