Publicité
Les langues disponibles
Les langues disponibles
Section 2: General Information and Setup
Know Your Power Washer
WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Read this manual thoroughly before assem-
bling and operating this unit. Save this manual
for future and immediate reference. Replace-
ment owner's manuals are available at
www.generac.com.
Emissions
The United States Environmental Protection
Agency
(US
EPA)
Resources
Board
equipment certified to California standards)
requires this engine/equipment to comply with
exhaust
and
evaporative
standards. Locate the emissions compliance
decal on the engine to determine applicable
standards.
See
the
warranty for emissions warranty information.
Follow the maintenance specifications in this
manual to ensure the engine complies with
applicable
emissions
duration of the product's life.
Remove Contents from Carton
1. Open carton completely by cutting each
corner from top to bottom.
2. Remove and verify carton contents prior to
assembly. Carton contents should contain
one each of the following:
• Main Unit
• Handle Assembly
• High-pressure Hose
• Spray Gun
• Lance
• Gun Hook and Tree Clips
• Oil
• Hose Hook Wireform
• Battery
• Battery Charger
• Parts Bag (includes):
– Owner's Manual
– Bag of Colored Nozzles
– Accessory Nozzle Holder*
– Screw*
– Hex Key*
– Register your product at
https://register.generac.com/
– *Included in units with accessory
nozzles (soap blaster or turbo noz-
zle)
Owner's Manual for Power Washer
(000100a)
(and
California Air
(CARB),
for
engines/
emissions
included
emissions
standards
for
3. Call Generac Customer Service at 1-888-
GENERAC (1-888-436-3722) with the unit
model and serial number for any missing
carton contents.
4. Record model, serial number, and date of
purchase on front cover of this manual.
Assembly
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Call Generac Customer Service at 1-888-
GENERAC
assembly issues or concerns. Please have
model and serial number available.
1. See
Figure
handle supports (B). Push in latch buttons
(C) and allow handle to slide into position.
Button will lock handle into place.
A
the
B
Figure 2-1. Insert Handle
NOTE: It may be necessary to move the
handle supports from side to side in order to
align the handle so it will slide over the handle
supports.
2. See
Figure
Figure 2-2. Install Hose Hook
General Information and Setup
WARNING
(1-888-436-3722)
2-1. Place handle (A) onto
2-2. Install hose hook.
(000100a)
for
any
C
012442
012443
3
Publicité
