KERN and SOHN MBA Serie Mode D'emploi page 56

8.3 Hold function (Standstill function)
The balance has an integrated standstill function (mean value calculation). This
allows one to weigh the baby exactly, even if it is not restful in the weighing pan.
Start balance by pressing
Await zero display
Place the baby, press
and the HOLD symbol appears flashing. During this time the
weight is calculated.
After that the weight of the baby is displayed and "frozen". The
HOLD symbol is not more flashing.
(example)
After unloading the balance, the weighing value is kept for 10 sec.
in the display, the HOLD symbol flashes again during this time.
Then the balance returns automatically into the weighing mode.
The "HOLD" symbol disappears.
22
.
, "---------" will shortly be displayed
TMBA_B-BAPS-e-2111