KERN and SOHN MBA Serie Mode D'emploi page 54

8 Operation
8.1 Weighing
Start balance by pressing
The balance carries out a self-test.
The scales are ready for operation as soon as the weight display
for "0.000 kg" has appeared.
 However, you can reset the weighing scale to zero by pressing
Put baby in the centre of the weighing pan.
Wait for the stability display
result.
 If the baby is heavier than the max. weighing range, the display
20
the key.
shows "oL" (=overload) and a beep sounds.
.
, then read the weighing
TMBA_B-BAPS-e-2111