gEnERaL SaFETY RULES
WaRning:
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically treated lumber.
your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed to
filter out microscopic particles.
WaRning:
REaD anD UnDERSTanD aLL WaRningS, CaUTiOnS anD
OPERaTing inSTRUCTiOnS BEFORE USing THiS EQUiPMEnT.
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
1. REaD THE inSTRUCTiOn ManUaL BEFORE OPERaTing THE
MaCHinE. To minimize the possible occurrence of accidents and personal injury,
learn the tool's application, limitations, and specific potential hazards peculiar to
this tool.
2. WEaR EYE anD HEaRing PROTECTiOn. aLWaYS USE SaFETY
gLaSSES WiTH SiDE SHiELDS. unless otherwise specified, everyday
glasses provide only limited impact resistance, they are NOT safety glasses. use
only certified safety equipment; eye protection equipment should comply with
ANSI Z87.1 standards. Protective hearing equipment should comply with
ANSI S3.19 standards.
3. DO nOT USE THiS OR anY OTHER MaCHinE WHEn YOU
aRE TiRED, UnDER THE inFLUEnCE OF DRUgS, aLCOHOL, OR
MEDiCaTiOn. WaTCH WHaT YOU aRE DOing, STaY aLERT anD
USE COMMOn SEnSE.
4. WEaR PROPER CLOTHing. Do not wear loose clothing, gloves, neckties,
rings, bracelets, wrist watches or other jewelry which may get caught in moving
parts. Wearing nonskid footwear is recommended as well as wearing protective hair
covering to contain long hair.
4