General Safety Rules - Genesis GMSUDR15L Manuel D'utilisation

10" Slide Compound Laser Miter Saw, 15 AMP
Operator's Manual
Specifications:
• Model: GMSUDR15L
• Rated Input: 120V~AC, 60HZ, 15A
• No Load Speed: 5,000 rpm
• Blade Size: 10" (254mm)
• Arbor Size: 5/8" (16mm)
• Blade Bevel: 0-45°
• Blade Miter: 0-45° Left, 0-45° Right
• Cutting Capacity @ 90° 3" H x 12-1/5" W
• Cutting Capacity @ 45° 3" H x 8-1/4" W
• Cutting Capacity @ 0° Miter & 45° Bevel: 1-5/8" H x 12-1/5" W
• Cutting Capacity @ 45° Miter & 45° Bevel: 1-5/8" H x 8-1/4" W
Laser:
- Class II Laser
- Wave Length: 650 nm
- Max Output <1.0 mw
- Runs on two AAA batteries (included)
Includes Miter Saw, 60T Carbide Tipped Blade, Hold Down Clamp, Dust Bag, Extension Wings, Rear Support Foot Bar,2-AAA Batteries for Laser and
Wrenches
WArning:
To reduce the risk of injury, user must read and understand this operator's manual before operating this tool. Save this
Manual for future reference.
Toll-Free Help Line: 1-888-552-8665.
WEAR yOUR
WArning:
SAFETy GLASSES
The Operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye
damage. Before beginning tool operation, always wear safety goggles or safety glasses with side shields and a full face shield
when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
FORESIGHT IS BETTER
Always wear eye protection which is marked to comply with ANSI Z87.1.
THAN NO SIGHT
Look for this symbol to point out important safety precautions.
it means attention!!! Your safety is involved.

gEnErAL SAFETY rULES

WArning:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
10" Slide Compound Laser Miter Saw
Operator's Manual GMSUDR15L