Publicité
Les langues disponibles
Les langues disponibles
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting
play.
1 Press the DISC CHANGE button.
2 Remove the discs and replace with other discs.
3 Press the =
OPEN/CLOSE
button
to close the disc
compartment.
When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
Do not place more than one compact disc on one disc tray.
Do not tilt the unit with discs loaded. Doing so may cause
malfunctions,
RANDOM PLAY
All the tracks on the selected disc or on all the discs can be
played randomly,
Press the RANDOM button on the remote control.
RANDOM lights up on the display.
To cancel random play, press again.
Even if the +<
button is pressed, a previously played track
cannot be skipped. The unit returns to the beginning of the
current track only.
Direct selection of the tracks with the numeric buttons is not
possible,
REPEAT PLAY
A single disc or all the discs can be played repeatedly.
Press the REPEAT button on the remote control.
C
lights up on the display.
To cancel repeat play, press again.
PROGRAMMED
PLAY
Up to 30 tracks can be programmed from any of the inserted
Use the
1
2
3
5
44
remote control.
1 Press the PRGM button twice in stop mode.
The PRGM indicator flashes on the display.
2
3
4
5
Press one of the DISC DIRECT PLAY buttons to
select a disc.
The selected disc is indicated in red on the display.
Go to the next step when the tray stops rotating.
Press the numeric buttons and the +10 button to
program a track.
Example:
To select the 25th track, press the +1 O, +1 O and 5 buttons.
To select the 10th track, press the +10 and O buttons.
Total playing time of
Program number
the selected tracks
Selected track number
Total number of
selected tracks
Repeat
steps
2 and 3 to program
other
tracks.
Press the +>
button to start play.
To check the program
Each time the +<
or
> button is pressed in stop mode, a
disc number,
track number,
and program
number
will be
displayed.
To clear the program
Press the
CLEAR button in stop mode.
To add tracks to the program
Before
playing,
repeat
steps 2 and 3. The track will be
programmed after the last track.
To change the programmed
tracks
Clear the program and repeat all the steps again
During the programmed
play, the CD EDIT/CHECK,
DISC
CHANGE, RANDOM, DISC DIRECT PLAY and numeric buttons
do not function.
When the PRGM button is pressed once in step 1, the unit
enters the KARAOKE PROGRAM (page 20).
ENGLISH
12
Publicité
