Publicité
Les langues disponibles
Les langues disponibles
14.1 Operating elements and displays
► Use the buttons
5-20°C.
► The temperature of upper zone must be lower than or equal to the temperature of down
zone.
► Temperature recommendations: Red wine: 12°C – 16°C and white wine 6°C – 10°C.
► The device can achieve the best cooling and consumption results at a recommended
ambient temperature of 16-20 °C.
► In case of high temperature difference between both zones the energy consumption of the
device may be higher as indicated in the technical data.
Press the power button to switch on / of the device and both zones.
When the LED lights the device is working.
With
you can adjust the temperature in 1°C steps.
The temperature of upper zone can be controled with the left
shown in the left display.
The temperature of lower zone can be controled with the right
shown in the right display.
By pressing the
the temperature display in ° C and ° F.
You can switch the interior light on or off by pressing the "Light" button.
If "ECO" is displayed, the interior light is deactivated.
If the "Light" button is pressed, "ECO" disappears from the display and the lighting is
activated. The light will switch off automatically after 4 hours to save energy.
When the door is open, the interior is always illuminated.
The temperature in the device depends on the room temperature, the quantity of bottles and
the chosen temperature. Please note that your device is intended to cool wine. The
maximum temperature that can be reached inside the device cannot be significantly ABOVE
the ambient temperature at the setup location.
14.2 Rating plate
The rating plate with the connection and performance data can be founded on the back of
the device.
Please note
to set the temperature for both zones in the range of
buttons silmultaneously for 5 seconds, you can switch between
buttons and is
buttons and is
30
Publicité
