Publicité
Les langues disponibles
Les langues disponibles
FEATURES
ES
▶Power: 45W
▶Speeds: 3 levels
▶Fixed or oscillating position
PT
▶security grill
▶Blade diameter: 40cm
▶Heights: min.100 - max.120cm
EN
▶Oscillating
FAN PARTS
1. Grid retaining ring
FR
2. Front of the grille
3. Propeller fixator
4. Propeller
5. Grid holder
6. Back of the grid
7. Engine
8. Dashboard
9. Oscillation regulator
10. Fixing screw
11. Telescopic top tube (chrome)
12. Fixing ring
13. Telescopic lower tube (white)
14. Cover
15. Foundation
Instruction manual
ASSEMBLY INSTRUCTIONS
1. Remove all packaging carefully, avoid scratching the
plastic covers with scissors or knives.
3. Insert the rear grille into the front of the motor shaft. Make
sure the center holes are tight on the shaft.
4. Secure the rear grille using the 4 screws.
5. Insert the propeller
6. Fix the helix with the screw
7. Cover the front grille, adjusting it to the lace
8. Tighten the security screw with a screwdriver
9. Assemble the base as shown in the diagram above, fixing
it with the screw below the base.
RUNNING
▶Through the 3-speed system you can start the fan, this system is
designed to give you maximum flexibility. You can also activate the
oscillation function using the oscillation slider.
• POSITION 0: OFF position, no button pressed.
• POSITION 1: first gear
• POSITION 2: second gear
• POSITION 3: third gear
• SWING: swing button / set direction (num.9)
Ref. 33973
Publicité
