Publicité
Les langues disponibles
Les langues disponibles
EN
WARNING
Read and understand this entire owner's manual, including
all safety information, before plugging in or using this
product. Failure do to so could result in electric shock, fire,
serious injury, or death.
OPERATION INSTRUCTION：
Plug in a power plug and hear a long buzzer, then the electric fireplace is in
standby mode. Press the POWER key on the touch panel to show red, and the
rest of the display is not displayed. At this time, the electric fireplace is in
standby mode.
Note: the ICONS on the touch panel have the same function as the
ICONS on the remote control.
PULL
12
small remote control
Remove the remote control
insulation sheet.
ICONS
FUNCTIONS
Switch on/off Button:
Switch On: Press the POWER button on touch panel or
POWER
on remote control with a short buzzer sound, the
electric fireplace starts to work, the POWER button on
the touch panel with blue color, other keys with white
color, the LED lights on the front and back start to
light up, the display window shows the room
temperature.
When the input terminal of the controller is energized
(that is, the power supply is 110V), only the power
indicator of the touch panel lights up, and the digital
tube and other lights are off.
Self-check Function when plugged in:
The fan and heating frame will run for 30 seconds and
10 seconds to dissipate heat after plugging in. All 9
flame colors will be on once, each frame color will last
for 3 seconds, and the reflector motor and the light
start synchronously, and keep rotating until the light
goes out.
Switch Off: Press the POWER button the touch panel
or on remote control with a short buzzer sound, the
LED light will be off/electric fireplace will be
off/heating will be off. The POWER button on the touch
panel will turn red to show all functions off. At the
same time, the fan inside the fireplace will continue to
last for 10 seconds after switching off, then the
fireplace is in standby state.
EN
13
Publicité
