Beurer BR 90 Mode D'emploi page 39

• When using the device on multiple areas that have been stung and
bitten, it is recommended that you clean the heating plate each time.
This reduces the possibility of germs and bacteria being transferred
from one area of skin to the next. To disinfect the heating plate, use a
paper towel moistened with disinfectant.
9. WHAT IF THERE ARE PROBLEMS?
Problem
The device does not
switch on.
The device no longer
gets hot enough.
Possible cause
The ON/OFF switch
is in the OFF
2
position.
The batteries are flat. Replace both batteries
The battery level is
too low.
39
Solution
Slide the ON/OFF switch
into the ON position.
2
as described in these
instructions for use.
Replace both batteries
as described in these
instructions for use.