Costway ES10181US Mode D'emploi page 9

□ Remove the pre-installed
screws and install the lamp
at the specified position.
Light panel
Light panel screws
Phillips
screwdriver
Assembly-Attaching the Lights
LED Light
LED screws
16
LIGHT LED
White White
Blue Blue
□ Put the LED light source into the disc (the LED light source has
a magnet,which can be directly magnetized on the disc).
□ Pass the LED lead of the motor through the hole in the middle
of the LED light source.
□ Then plug the male terminal of LED lead into the female
terminal of LED light source.(as shown in figure)
17