Publicité
Les langues disponibles
Les langues disponibles
WARNING: Each wire not supplied with this fan is designed to
accept up to one12-gauge house wire and two wires from the fan.
If you have larger than12-gauge house wiring or more than one
house wire to connect to the fan wiring, consult an electrician for
the proper size wire nuts to use.
WARNING: Remove the rubber motor stops on the bottom of
the fan before installing the blades or testing the motor.
IMPORTANT: Use the plastic wire connectors(BB) supplied
with your fan. Secure the connectors with electrical tape and
ensure there are no loose strands or connections.
2. Making the electrical connections
WARNING :Each wire not supplied with this fan is designed
to accept up to one12-gauge house wire and two wires from
the fan. If you have larger than12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
WARNING: Remove the rubber motor stops on the bottom
of the fan before installing the blades or testing the motor.
IMPORTANT: Use the plastic wire connectors(BB) supplied
with your fan. Secure the connectors with electrical tape and
ensure there are no loose strands or connections.
20
21
Publicité
