Publicité
Les langues disponibles
Les langues disponibles
□ Raise the fan and place the hanger ball onto mounting bracket.
□ Rotate the fan until the notch on hanger ball snapped into the
slot on mounting bracket and sits firmly.
NOTE: THE DOWNROD AND HANGER BALL SHOULD NOT
ROTATE IF THIS STEP IS DONE CORRECTLY
□ Loosen the safety wire clamp.
□ Route the safety wire through the side fan hole on mounting.
bracket, and retighten the safety wire with safety wire clamp.
□ Connect the wire connector plugs correctly.
The wire connector plugs designed with fool proof device, please
don' t force to plug. Otherwise it may affect the normal use of the
light fan or burn the fan motor.
FanSpeed1~6control (1~low speed,6-high speed)
Turns off the fan
Auto off after 1hr
Auto off after 4hr
Auto off after 8hr
Natural Wind
Forward or reverse operation:Press the button for 2sec
until there is a "BEEP"sound to change fan rotating
direction Fanchange direction. (approx.2sec)
22
Light on
Light off
Fan On/Off
Froward
/Reverse
Auto off
after 1hr~8hr
Light on
Natural
Wind
1~6
Level
Light off
23
Publicité
