Costway ES10181US Mode D'emploi page 13

Troubleshooting
Problem
The fan will
▪ Check the main and branch circuit fuses or
not start
breakers.
▪ Check the line wire connections to the fan
and switch wire connections in the switch
housing.
▪ Ensure all motor housing screws are snug.
▪ Ensure the screws that attach the fan blade
bracket to the motor hub are tight.
▪ Ensure the wire nut connections are not
rattling against each other or the interior wall
of the switch housing.
▪ Allow a 24-hour "breaking in" period. Most
noises associated with a new fan disappear
curing this time.
▪ If you are using the Ceiling Fan light kit,
ensure the screws securing the glassware are
tight.
Check that the light bulbs are also secure.
▪ Ensure the canopy is a short distance from
the ceiling. It should not touch the ceiling.
▪ Ensure your outlet box is secure and rubber
isolator pads were used between the mounting
plate and outlet box.
24
Solution Problem
The fan
▪ Check that all blades and bladearm screws
wobbles.
are secure.
▪ Most fan wobble problems are caused when
blade levels are unequal.
▪ Check this level by selecting a point on the
ceiling above the tip of the blades.
▪ Measure from a point on the center of each
blade to the point on the ceiling.Measure this
distance.
▪ Rotate the fan until the next blade is
positioned for measurement.
▪ Repeat for each blade. Any measurement
deviation should be within 1/8 in.
▪ Run the fan for ten minutes. If the fan
continues to wobble please contact Customer
Service.
Solution
25