Westfalia 16 86 74 Manuel D'instructions page 25

Using the Biscuit Former
1. Attach the biscuit former on the worm shaft.
2. Slide the biscuit shaper (19) on the shaper
holder (20) up to the desired form.
3. Form the prepared dough to a roll of 3
thicknesses and feed the dough through the
filling tube.
4. Switch on the appliance by pressing the
ON/OFF switch. Only use the pusher to press
the dough through the filling tube!
5. Cut the extruded dough into pieces of any desired length.
6. After finishing, switch off the appliance and unplug it.
All manuals and user guides at all-guides.com
Operating
21